Project Update

[chooka03]

That's great news! 

[Dataman]

 
My R-Box has shipped and I should get it on the 10th.
@ JN: Some questions if you don't mind:
1. Did you use the zadig driver?
2. What are your run times?
3. Any tips?
Thanks!

[JugNut]

My R-Box has shipped and I should get it on the 10th.
@ JN: Some questions if you don't mind:
1.  Did you use the zadig driver?
2.  What are your run times?
3.  Any tips?
Thanks!

Sweet!!  I hope she's a good clean pick.

1  Yep sure did,  if you already have them installed on that box you probably wont need to again. But check just to make sure ;)
2  for 20GH #12's between about 12 - 14 mins.  I't s a tad slower now as it needs a good dusting out.
3  When plugging in or unplugging the 6 pin PCI-E lead make sure it's done in one clean action so there's as little sparking as possible.
Also when the hash rate go's from around 110GH down to under to say 107 - to 105GH then then it most probably just needs opening up & dusting, as that's what mine needs ASAP. If I think of anything else i'll let you know.

4. Have fun :)

[Dataman]

My R-Box has shipped and I should get it on the 10th.
@ JN: Some questions if you don't mind:
1.  Did you use the zadig driver?
2.  What are your run times?
3.  Any tips?
Thanks!

Sweet!!  I hope she's a good clean pick.

1  Yep sure did,  if you already have them installed on that box you probably wont need to again. But check just to make sure ;)
2  for 20GH #12's between about 12 - 14 mins.  I't s a tad slower now as it needs a good dusting out.
3  When plugging in or unplugging the 6 pin PCI-E lead make sure it's done in one clean action so there's as little sparking as possible.
Also when the hash rate go's from around 110GH down to under to say 107 - to 105GH then then it most probably just needs opening up & dusting, as that's what mine needs ASAP. If I think of anything else i'll let you know.

4. Have fun :)

Thanks, I will power it down and shut off the PSU before plugging it in. The PC has not run BU before (it was dead a fair while) so I will have to install the driver. I hope it is a good one. I bid on an ant U3 but did not get it; it sold for a ridiculous price way over my bid. Still looking for another R-Box but there are none to be had.

[Dingo]

There is a new "Bitmain AntMiner U3 Bitcoin Miner Version 2" on amazon for $200 US at https://www.amazon.com/Bitmain-AntMiner-Bitcoin-Miner-Version/dp/B00TWK9208/ref=sr_1_15?ie=UTF8&qid=1483832023&sr=8-15&keywords=bitcoin+miner

I can't afford that much..

[Dataman]

I can't afford that much..

It is not worth that much and the seller has no history and no other items for sale.    I only paid $85 + $15 shipping USD for the r-box and I thought that was too much.  biggrin

[chooka03]

I saw that $200 (USD mind you) for the U3 on Amazon.
Crazy

The USB ASICS are a hot item imo after watching the silly prices on Ebay for the U1's. Might be able to profit from Bitcoin just by owning the hardware!

[Dataman]

WOW
I have to thank Dingo for this one. After checking out the U3 he posted, I when over to eBay and found two r-boxes that were listed only 9 min before. If I had not read the post I would not have gone to eBay! I hit "Buy It Now" and bought them for $200. W00T! If all three work, I will decom. the Gecko's and make my life easier.  biggrin I will have to put them on a stand-alone PSU but that should not be a problem.
Still raining here. 3cm forecasted for today after 1 cm yesterday. 

[JugNut]

Nice pick up Dataman

[chooka03]

Here's more if your interested!

http://www.ebay.com/itm/2-Rockminer-R-Boxs-450gh-s-Each-Power-Supply-Raspberry-Pi-And-Cables-Included-/262797228271?hash=item3d2fef78ef:g:TzYAAOSwOdpXxOEb

$110 for 2 with Pi, PSU and cables.

If you didn't live so far away Dataman, I'd take the gamble and buy the Geckos from you if you weren't going to use them....but you'd probably get more for them on Ebay :)
Can't believe how cheap some of this stuff is in the U.S. I never bothered to look at the U.S Ebay.

I'll be sticking to USB ASICS  This looks good!

http://www.ebay.com/itm/Butterfly-Labs-ASIC-Bitcoin-miner-60GHS-used-with-power-supply/182398850251?_trksid=p2047675.c100009.m1982&_trkparms=aid%3D888007%26algo%3DDISC.MBE%26ao%3D1%26asc%3D40839%26meid%3D88eaf770ff0f4c3b8c4a670c05fc6400%26pid%3D100009%26rk%3D1%26rkt%3D2%26sd%3D122303361177

[Dataman]

Here's more if your interested!

http://www.ebay.com/itm/2-Rockminer-R-Boxs-450gh-s-Each-Power-Supply-Raspberry-Pi-And-Cables-Included-/262797228271?hash=item3d2fef78ef:g:TzYAAOSwOdpXxOEb

$110 for 2 with Pi, PSU and cables.

If you didn't live so far away Dataman, I'd take the gamble and buy the Geckos from you if you weren't going to use them....but you'd probably get more for them on Ebay :)
Can't believe how cheap some of this stuff is in the U.S. I never bothered to look at the U.S Ebay.

I'll be sticking to USB ASICS  This looks good!

http://www.ebay.com/itm/Butterfly-Labs-ASIC-Bitcoin-miner-60GHS-used-with-power-supply/182398850251?_trksid=p2047675.c100009.m1982&_trkparms=aid%3D888007%26algo%3DDISC.MBE%26ao%3D1%26asc%3D40839%26meid%3D88eaf770ff0f4c3b8c4a670c05fc6400%26pid%3D100009%26rk%3D1%26rkt%3D2%26sd%3D122303361177

I bought one of these:
http://www.ebay.com/itm/Rockminer-R4-500-Gh-s-/122303361177?hash=item1c79d93099:g:WlMAAOSwt5hYcmH3
He still has over 10 of them left. The miners keep getting cheaper but PSU's have greatly increased. About 6 months ago I bought an EVGA 1,000 W Platinum for $118. I just had to buy 2 more for the miners at $185.50 EACH.  :furious: plus I had to get 8 mini-USB cables (gold) for $13.95 each (10 ft.).  
I am done buying now. When I get finished in a couple of weeks I will have (I hope):
1x Rockminer R4 (500 G/H)
4x Rockminer R-Box 2 (110 G/H)
2x Antminer U3 (48 G/H)
I will probably give the Gecko's away to some of you blokes but I have to check some things out first. The USA has some strange laws about shipping some electronics out of the county and OZ has some strange ones about importing them. I don't care about the money but there are limits to the hoops I will jump though with the USPS.  biggrin I would like to see more at B@A running BU. I want us to get back in the top 10 world wide again.  


EDIT: Shhhhhh, don't tell Karen about this.  

[chooka03]

Wow...so cheap! Well compared to what I/we paid for a Gecko relative to output. 

Don't worry..... I won't tell Karen  biggrin Boy are you going to be pumping out some BU number.......and your house will be all nice and cozy with all that heat Dataman 

[chooka03]

What's with campaign #5 only having 20GH/s tasks??
Sometimes I'm successful at completing them with a Gecko/U1, other times 12hrs later it's still ticking over so I start again :( 7400 second for these tasks.

[Dataman]

What's with campaign #5 only having 20GH/s tasks??
Sometimes I'm successful at completing them with a Gecko/U1, other times 12hrs later it's still ticking over so I start again :( 7400 second for these tasks.

I don't know. Henri takes his own sweet time. Maybe later.  ???

[Dataman]

I received 2 r-box 110 G/H and installed them. One is working; the other is not. One has a red power light and a blinking blue status light. The other has a red power light and no status light. I am assuming no status light is NOT a good thing but my search in the forums for what the status light should be has not found anything. Whichever one is working is running 20 G/H in 18-20 min. I checked the drivers, cc_config and device manager and everything is OK for both of them.
@JN: What does your status light do?