News:

BOINC@AUSTRALIA has a facebook page at https://www.facebook.com/groups/7742313626/
Come on by and have a look.

How to RADIOACTIVE@HOME

Started by d_worms, November 15, 2012, 03:20:01 PM

Previous topic - Next topic

d_worms

November 15, 2012, 03:20:01 PM Last Edit: November 15, 2012, 08:48:47 PM by d_worms
When you get your sensor:
   1. Join RADIOACTIVE@HOME This project uses BOINC. If you're already running BOINC, select Add Project.
When prompted, enter http://radioactiveathome.org/boinc
   2. Connect the radiation sensor to your computer. Sensor beeps by default  :hbang: to stop it you haw to go to Your account/Radioactive@Home preferences and disable buzzer, it will stop buzzing after R@H finishes current task and download new one (2h by default) You can speed it up by aborting the current task to force a new task.  :panic: Sometimes it takes couple minutes to stop beeping.
The thing is it clicks by default so it will start beeping again if you power-down and reboot and it will continue to beep until BOINC starts and the R@H application reads the project preferences and turns it off again. If BOINC doesn't start then it just continues beeping.
New batch will have switch to turn the buzzer off.
   3. Wait until your computer sends the first data, only than you can add your sensor to THE MAP by clicking on "ADD" in http://radioactiveathome.org/boinc/index.php  and on Details in first row (Computer ID) otherwise you will get only half of your points!!!

Cheers
Dawid S.

d_worms

November 19, 2012, 10:29:44 PM #1 Last Edit: November 19, 2012, 10:31:32 PM by d_worms
Today I have noticed that my and two other sensors from Sydney have disappear from R@H map plus validator didn't gave my any points since yesterday (notice last 3 tasks with very long run time and 0 points).
I did reset  R@H and plug it in 2 different USB port as advised by R@H admin and its working now. Please check your sensors and tasks guys!!!!

1158065   1138778   19 Nov 2012 | 10:46:51 UTC   19 Nov 2012 | 11:17:56 UTC   Completed and validated   1,842.46   0.20   3.18   Radioactivity Monitor v1.69
1157991   1138704   19 Nov 2012 | 10:13:19 UTC   19 Nov 2012 | 10:46:51 UTC   Completed and validated   1,990.18   0.31   3.23   Radioactivity Monitor v1.69
1157965   1138678   19 Nov 2012 | 10:02:05 UTC   19 Nov 2012 | 10:13:19 UTC   Aborted by user   55.46   0.11   ---   Radioactivity Monitor v1.69
1157831   1138544   19 Nov 2012 | 9:10:54 UTC   3 Dec 2012 | 9:10:54 UTC   In progress   ---   ---   ---   Radioactivity Monitor v1.69
1156838   1137551   19 Nov 2012 | 1:53:02 UTC   19 Nov 2012 | 9:10:54 UTC   Completed and validated   22,648.91   3.17   0.00   Radioactivity Monitor v1.69
1155882   1136595   18 Nov 2012 | 19:36:43 UTC   19 Nov 2012 | 1:53:02 UTC   Completed and validated   22,539.01   3.48   0.00   Radioactivity Monitor v1.69
1153968   1134681   18 Nov 2012 | 7:27:14 UTC   18 Nov 2012 | 19:36:43 UTC   Completed and validated   25,696.41   3.14   0.00   Radioactivity Monitor v1.69
Cheers

Dingo

Mine are all good, thanks for the heads up though.  :thumbsup:


Radioactive@home graph
Have a look at the BOINC@AUSTRALIA Facebook Page and join and also the Twitter Page.

Proud Founder and member of BOINC@AUSTRALIA

My Luck Prime 1,056,356 digits.

Have a look at my  Web Cam of Parliament House Ottawa, CANADA

JugNut

November 19, 2012, 11:10:47 PM #3 Last Edit: November 20, 2012, 02:22:52 AM by JugNut
I think mines alright too?  My sensor is on the map & all my WU's seemed to have validated correctly. 

Can you see my sensor on the map d_worms?    Or more to the point who's missing?

Thanks for the warning....  :thumbsup:


 - Participated in AA's 27 - 55 & Team Challenge # 1.
My team (Boinc@Australia) stat's
My personal stat's


     Crunching today for a better tomorrow...

d_worms

WikiWill is missing and my second sensor :D

WikiWill

Sorry to set of the alarms guys! My computer was down for some unrelated work.  I should be back on now  :bloodshot

If the computer is shut down again for a while, do I need to add to the map again, or is this automatic?

Cheers mates!

Sean

Has anyone had success using their sensor with a Raspberry PI? When I tried it was not detected, kept throwing the following errors:

"Warning: cannot query manufacturer for deive: error sending control message: operation not permitted"

"Debug (openDevice): 16c0:05df obdev.at/datastore not found or could not be accessed: Device communication error"

"Debug (openDevice): 16c0:05df obdev.at/radioactiveathome.org GRS not found or could not be accessed: Device communication error"


I did post about it on the Radioactive@home forum but didn't have much success. I'm just curious if anyone on here has had the same problem? I wouldn't mind getting it fixed because my PI is on 24/7 while the computer isn't.

???

Dingo

No I haven't tried and just too much trouble for my Rapberry Pi 2.  They say they have an application for the Raspberry Pi with Arm6 so the older Raspberry should work,  Raspbian running on Raspberry Pi (armv6l)


Radioactive@home graph
Have a look at the BOINC@AUSTRALIA Facebook Page and join and also the Twitter Page.

Proud Founder and member of BOINC@AUSTRALIA

My Luck Prime 1,056,356 digits.

Have a look at my  Web Cam of Parliament House Ottawa, CANADA

JugNut

April 17, 2015, 02:39:53 PM #8 Last Edit: April 17, 2015, 11:21:17 PM by JugNut
A small tip(very small) to Radioactive users. I've had the one sensor running for well over a year and a half in all that time i received at most 148 credits a day,  it's up & down of course but 98% of the time I received 148 crd's/day. Lately I've noticed people getting from 150 - 154 credits a day(every day almost).
Anyway to cut a long story short(well shorter anyway) the trick to extra credits is to reduce your settings you have in preferences down to 0.5 meaning you get a new radiation WU every 1/2 an hour. The way it looks to work is that each WU's only takes 28mins to complete meaning over the course of a day you get an extra WU & in rare cases some people get an extra 2 WU's a day from just reducing down to half hour increments.  I tested this and it works I now get 152 credits a day instead of 148.(I said it was a small tip) But could well help in overall team rankings.

But before you blow it off as just a few points remember over the course of a year you could get an extra 1000 plus credit. Meaning that you can pass others with the same amount of sensors that don't do this tip or others that do do this tip will pass you.  When you get such small credits every(tiny) bit helps.

PS for some reason in took 4 days plus for it to kick in.  Remember it may not work for you but it's worth a try. Isn't it?

PSS. Remember to have <report_results_immediately>1</report_results_immediately> flag set in cc_config.  Might be the difference.

PSSS If you have long periods without internet this will not work for you & would actually reduce your daily output by quite a lot. If this is your case take the largest available WU which is 48hrs.  As always YMMV.


 - Participated in AA's 27 - 55 & Team Challenge # 1.
My team (Boinc@Australia) stat's
My personal stat's


     Crunching today for a better tomorrow...

Dingo

I have been living at my daughters place since March 2020 and just now attached my sensor to my PC and downloaded a task.   For the life of me I couldn't remember how to attach to the map, but the forum came through with this thread.  Waiting for my first task to complete to add my PC to the map.

Crunch on Brothers and Sisters.  :niceday


Radioactive@home graph
Have a look at the BOINC@AUSTRALIA Facebook Page and join and also the Twitter Page.

Proud Founder and member of BOINC@AUSTRALIA

My Luck Prime 1,056,356 digits.

Have a look at my  Web Cam of Parliament House Ottawa, CANADA