"Missing CUDA device".

[yoda]

Rob, what driver is recommended when you run "Hardware Drivers", nVidia-settings or some such?  My 9800GT is running just fine and dandy with the recommended driver, in this case 177.82

[Rob]

Did you reboot after installing the drivers?

Yep

Rob, what driver is recommended when you run "Hardware Drivers", nVidia-settings or some such?

The only place I've seen anything about recommended drivers was in Envy? Under Kubuntu 8.10 it recommended 177.82, which didn't work so I upgraded to 180.something. With 9.04 it recommends 180.44, which is what I'm running.

[clownius]

Just something odd i stumbled upon while getting my server and its GTX280 going.  When BOINC starts it wont find my GTX 280 because it starts before login.  I have to restart BOINC after login (the init.d thing) for it to find the GTX 280 again.  Its really really anoying as it throws away any tasks it has cached and needs to redownload them and start again.   Anyone know a fix for this?  The computer autologs in so i really need to delay the loading of BOINC.  A minute or two would be more than enough.

[yoda]

The computer autologs in so i really need to delay the loading of BOINC.  A minute or two would be more than enough.

I think you'd need to change the runlevel for BOINC (to not start until in graphical mode) and then as one of the last services to start within that run level.

See if bum (Boot-Up Manager) can help

[Mike Mitchell]

There is a way of delaying when a program starts. I think it is in the init.d or a similar directory. I have never done it through a GUI though.

[Rob]

Yipee!! Finally got it working . It was as simple as adding Boinc to the video group. According to this thread http://boinc.berkeley.edu/dev/forum_thread.php?id=3564 I may have to redo it after a restart. They try to explain ways to make it stick at the end of the thread but I can't make heads nor tails of it. Doesn't help that they're talking about different flavours of Linux to mine either.
But that's OK. That comp would probably average a couple of weeks between restarts so it's not a major problem biggrin

[Mike Mitchell]

The last post on that link has the code I was looking for in my last post.

"So i Put in my /etc/rc.d/boinc"

Code Select Expand

[ ! -z $1 ] && [ $1 = "start" ] && sleep 60

The sleep command makes next "step" pause for 60 seconds, in this case. The 60 can be replaced by any whole number but some years ago the timing was taken from an internal counter that may already be near the end of a second so using 1 as the sleep period may have almost no affect. Unless that bug was fixed.

[clownius]

Ok cant work out how to make this work under Kubuntu 9.04.
i found boinc_client in /etc/rc5.d and added that line.  All it does is pause the entire boot for 60 seconds and still has the same issue.  I somehow need to move boinc to be one of the last things to load if not the last thing?
Have i messed something up or does anyone else have another idea?

So many flavors of Linux there has to be 5 ways to do the same thing lol.

[yoda]

Have i messed something up or does anyone else have another idea?

Did you have a look at Boot-Up Manager (bum)?  It will let you change the boot order of services with ease.  Dunno about Kubuntu, but it's in the repositories for Ubuntu 8.10

Change boinc-client's boot priority at all run levels to 80 or so (anything higher than the gui)

[veebee]

Yipee!! Finally got it working . It was as simple as adding Boinc to the video group.

Hmm, I was hoping (when I saw this) that THIS might be the problem I am having (or more so this might be the SOLUTION to my problem..).

But there wasn't a group called "video". So I created one - no prob.

Then I went to add the user "boinc" to that group, but couldn't see a user with that name.

When I tried then, to create a user with the name "boinc", it tells me there is already a user with that name...

I REALLY REALLY want to get this GT9800 crunching GPUgrid.... the 9500 wasn't working either until the other day... I  followed the advice in the link that Rob has already posted, but I downloaded/ installed 6.4.5 from getdeb. unfortuneately thiat install didn't give me the option of "installing as a service or not", but upon the restart of the computer, boinc suddenly SAW the vid card and is SLOWLY grinding its way through GPU grid WU's. (very slowly).

I am starting to pull out what little hair I have left trying to get this 9800 working in boinc.... I want to try what Mike047 has suggested to me (but am worried about losing my close to "normal" screen resolution.. (took me weeks of fiddling to get it this close..)

Anyway, might be time to bight the bullet and just do what mike has suggested.

a Backup of xorg.conf will return me to the current "video settings/ resolution" etc wont it ? (though I guess I would have to have the same drivers in place as well.... which I want to remove - and start all over again...

THIS IS A PAIN - Why cant it just be "plug and work" ???  :furious: :hbang:

[clownius]

Thanks Yoda worked great :)  As for you veebee what method of altering users are you using mine was as simple as a tick box.

[Rob]

Dunno about Kubuntu, but it's in the repositories for Ubuntu 8.10

Yep it's there. I installed & ran it earlier ;D. Boinc was at run level 20 & kdm was at 30, so I changed Boinc to 40. Haven't tested it yet though, want to try & catch it after it finishes & uploads a wu so if it all goes Pear shaped I wont lose too much work.

EDIT:Woohoo it worked biggrin. It did restart the current wu though, but it was only 5 minutes in so I guess it hadn't reached a checkpoint yet.
Thanks Yoda. It's good to finally have this running properly after all these months ;D

[veebee]

.... veebee what method of altering users are you using mine was as simple as a tick box.

yeah, it's simply "ticking boxes"... to add a user to a group etc... my prob was when trying to create a user called"BOINC", to make a member of the group "video" (as per Rob's "simple as adding Boinc t the group "videos").

Anyways. Mike047's instructions worked first go, and also fixed my resolution problem at the same time !... killing two birds in Australia, with one stone...pretty good throw Mike !!! lol